#HGUS410 - 2-Ply LVL Hanger Face Mount | The HGUS is an extra-heavy-capacity hanger for applications requiring girder support. This girder hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. Value-engineered, the HGUS is designed to carry high loads for an economical price.
Key Features
Can be installed after the beam is secured in place
HGUS-series hangers are tested, load rated and code compliant
Material
12 ga.
Finish
Galvanized
Installation
Use all specified fasteners; see General Notes.
Joist nails must be driven at an angle through the joist or truss into the header to achieve the table loads.
Not designed for welded or nailer applications.
Do not use double-shear hangers with I-joists.
0.148" x 3 1/4" nails may be used where 0.148" x 3" nails are specified, with no reduction in load. Where 0.162" x 3 1/2" nails are specified, 0.148" x 3" or 0.148" x 3 1/4" nails may be used at 0.85 of the table l